Before we talk in detail about does PPF hide scratches or PPF scratch proof. First, let me help you explain the problem you are dealing with.
There are different type of car scratches. We all called these “scratches”.
Cleaning your car regularly is a great way to keep your ride looking shiny and new. But, just one mistake using the wrong products, you can have a scratch. Even wrong tools or cleaning techniques can scratch your beautiful paint job, too. Does it fit with PPF protection?
No, you don’t. Just simple explanation for types of car scratches and you will get it properly.
First, have a look on you car paint condition after washing. Yes, that’s the paintwork after you washed. And there are hard stuff on paint that you can wash away with car wash shampoo.
Why?
Because these contaminations stick to the paint surfaces. And car wash cleaning products are design to remove dirt and soft grime, not hard stuff. So each time you wipe out your car, you will damage it more.
Yes, for sure. Let’s say the car sits in the garage for a day or two and collects a bit of dust. Overall, the car is super clean, just from dust in the air etc.
So you grab a microfiber towel and damp it up with some window cleaner (or quick detailer spray) to remove the dust. Every single time you will notice some super light scratches being made on your car.
Is that your situation?
No mater you tried different things, you will always make super light scratches. Even a completely new microfiber towel with absolutely no dust inside. Are you tired now?
Why?
If it’s just dust, won’t driving it cause it to blow off? So, these tiny particles stick on your car and the wiping pressure causes the abrasion. In car detailing, we called it swirl marks.
Yes, for sure. Let’s say the car have many light scratches above. Most of them are from car wash and cleaning with towels. They are swirls marks.
Paint protection film (PPF) is a modern solution. It’s a thin but exceptionally durable polymer or polyurethane film. And that is the ultimate layer of protection for car paint. Technicians applied it to the front end of the vehicle, and covering the front bumper, car’s paint, grille, headlights, splitter. Some even covers the front portion of the hood and front fenders.
So we called it “clear bra”. The term “bra” is used to describe the location of the application. And the clear bra – as it called – is PPF scratch resistant barrier.
PPF works by absorbing and dispersing the energy of impacts. And preventing them from reaching the paint. PPF provides a layer of protection that can help to prevent damage to your car’s paint, keeping it looking new for longer.
This initial layer plays a vital role before the film even gets applied to your car. It protects the adhesive underneath from dust and debris. It also ensures a clean surface for application. The main function of this release liner is to ensure that PPF can adhere perfectly to your vehicle without imperfections.
So, professional installers must have a clean working room and minimize dust to keep the adhesive intact and ready for bonding.
Why?
Because this adhesive layer is sticky. What that means is that if your film’s adhesive comes into contact with anything, you will damage the adhesive layer. And I do mean anything, there’s a more than likely chance that it will stick.
Next comes the adhesive layer. This layer allows the PPF to bond securely to the vehicle’s paintwork. This adhesive is specifically formulated to provide a strong bond while being removable—meaning when you decide to replace or remove the PPF in the future, it won’t risk damaging your car’s underlying paint.
FACT: Many PPF shops want to keep PPF car protection cost low, they neglect the de-contamination steps. They also install without paint correction.
Although this is the best budget PPF, we don’t recommend this way.
Why?
Because the oxidized paint layer or the micro grime on paint is under these PPF layers. And over time, PPF contaminations will get worse. Sometimes, we see PPF not sticking after 2 years in Vietnam weather conditions.
This layer often referred as the heart of the film. And this layer provides unparalleled flexibility and resilience. It’s made from thermoplastic urethane. This PPF type of material will absorb impacts and allow movement of the surface beneath. We called it acting like a shock absorber for your paint.
This feature helps reduce chip damage significantly since it absorbs up to 99% of impact energy from road debris.
The final layer adds an extra line of defense against environmental threats. It protects against UV radiation. The UV radiation is the main cause of paint fading and degradation
Also some PPF materials have self-healing properties. When subjected to ambient heat, such as sunlight or engine warmth, minor scratches on this top layer can vanish as the material re-forms itself.
Let’s be 100% clear – not all products in the paint protection film market can work fit your daily use. No one can guarantee PPF anti scratch. There are many types of car PPF on sales now.
Yes, but not all scratches are equal. Well, let’s be realistic. PPF is a thicker, stronger, yet lightweight material than paint. But it’s not magic. Because the thickness you choose will depend on your vehicle’s needs. And it will ensure the level of protection you desire.
With a thickness of 8 mils and 10 mils, it is ~ 0.254 millimeters. And, it’s still a very thin layer. We can’t guarantee a PPF deep scratch.
Like any other paint protection solution, PPF has its limitation. It can only protect your paint from:
If you have plenty of time, or you are not satisfy with your best budget PPF. It’s time for a professional PPF installation services.
We know there are many ways to install PPF on cars. Some are simple, others are complicated. However, we will follow these Step-by-Step as follows:
Most people don’t realize how gentle we need to be with their car to ensure that all the protective layers and paint remain intact. In order to ensure that your washing routine prevents scratching, we have some hand wash packages to wash and protect your car.
Our goal here at EZ is to remove these contaminants and restore your paint’s original luster. So, stubborn road grime is our enemy. But we need to wash your car properly in order to preserve the integrity and good looks of your vehicle’s paintwork, and minimize surface scratching. And it’s take a lot of time to get the job done.
For a PPF to protect, it’s got to be bonded to a surface. This becomes possible when that surface is clean and free of debris. We also need to remove any damages on paint later. However, since a paint protection film is transparent, the condition of the paint or surface underneath makes a huge difference in the brilliance of the finished product.
Our DEEP CLEAN car wash is typically the first step of PPF prep. It involves the use of a car shampoo that acts as a detergent. It will break down the oils in wax, factory paint sealant. And it allow our detailers to wash all stuff away.
Later, we use a Clay bar with lubrication to remove – or ‘lift’ – surface contamination and pollutants from the surface of your car.
Once the surface has been cleaned and stripped of initial debris, our installers will inspect the condition of the paint. If it is faded, aged, has spider-webbing or swirl marks, or shows signs of damage, the installer will recommend paint correction to you.
Paint Correction Steps involve polishing or using a cutting compound to remove minor scratches. We also fix imperfections in the paint.
Our goal is a perfectly smooth surface that allows the PPF to bond. Also, the clear bra will reflect the brilliance of the paint finish to shine.
There are two types of methods for installing PPF film at EZ shop.
Most of the time, our installers use a plotter (or a machine) that pre-cuts the material in smaller, and custom-fit sections. We prefer installing pre-cut PPF for a fender or door edges.
Why? Because this helps to reduce waste, and save money. It also is crucial to expediting the PPF installation and making it fit better in smaller sections like door jams, headlights, and grilles.
The second method is using bulk film. It’s basically used when an installer does not have a plotter. Yes, that’s true. And they tend to result in excess material, more time, and less precision or accuracy of the installation. Our installers will lay an entire sheet of PPF on the panel and then cut the film by hand.
When used by an experienced installer, these problems can be mitigated. In fact, some are so good that they can hand-cut to fit rocker panels, side mirrors, the hood, deck lid, spoilers, and more. But sometimes, an accidentally cut too deep when trimming, causing damage to the underlying paint during the install.
The final step of our PPF installation is drying. This can be done a few different ways – either by time or using a specific drying procedure. Most installers prefer heat-activated by using a heat gun or even a torch. The process essentially activates the ‘glue’ and restricts the material to create an incredibly tight fit.
We prefer to let the film sit for couple hours to check any mistakes. Later, we will fix the film’s position to make sure it has bonded to the paint surface.
Yes, we do. Just drop us a message via Whatsapp at 035 499 6491 (English). We will contact you shortly.
PPF stands for Paint Protection Film or Clear Bra. This nearly invisible layer is made out of polymer or polyurethane. And it serves as an incredibly durable clear coat, protecting the vehicles’ surface from any damage.
Although there are many types of car PPF, we only suggest a TPU material PPF. In short, this type is widely use and much more cheaper than before. And you can also have the best budget PPF in District 2, Ho Chi Minh City.
No, it depends on what is PPF coating on Topcoat. So, you should choose the PPF that will heal minor scratch.
Yes and No.
We called it is PPF hydrophobic property. The hydrophobic properties of PPF Topcoat make cleaning you car significantly easier. Water will bead and run off the surface. It means cleaning dust and light dirt can be as simple a rinse with the hose with no scrubbing or soap needed.
Please note that PPF still needs to be regularly maintained to keep its hydrophobic properties and reach it’s intended lifespan.
These blogs are meant purely for education and demonstration purposes. It contains only general information and may not account for specific issues related to your particular vehicle or situation. All content provided on this blog is for informational purposes only. The owner of this blog makes no representations as to the accuracy or completeness of any information on this site or found by following any link on this site.
No warranties
THIS WEBSITE IS PROVIDED “AS IS” WITHOUT ANY REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF TITLE OR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. COMPANY MAKES NO REPRESENTATIONS OR WARRANTIES IN RELATION TO THIS WEBSITE OR THE INFORMATION AND MATERIALS ON THIS WEBSITE. WITHOUT PREJUDICE TO THE GENERALITY OF THE FOREGOING PARAGRAPH, COMPANY DOES NOT WARRANT THAT THIS WEBSITE WILL BE CONSTANTLY AVAILABLE, OR AVAILABLE AT ALL; OR THE INFORMATION ON THIS WEBSITE IS TRUE, COMPLETE, ACCURATE OR NON-MISLEADING. NOTHING ON THIS WEBSITE OR IN THE BLOG CONSTITUTES OR IS MEANT TO CONSTITUTE ADVICE OF ANY KIND.
Limitations of liability
IN NO EVENT SHALL THE COMPANY BE LIABLE TO CLIENT FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES OR FOR ANY BUSINESS LOSSES, LOSS OF REVENUE, INCOME, PROFITS OR ANTICIPATED SAVINGS, LOSS OF CONTRACTS OR BUSINESS RELATIONSHIPS, LOSS OF REPUTATION OR GOODWILL, OR LOSS OR CORRUPTION OF DATA WHATSOEVER RESULTING FROM ANY ACT OR OMISSION RELATING TO THE SERVICES.
These blogs provide information about past occurrences with vehicles. This may not allow for a proper diagnosis in all instances. Your particular issue may contain unknown factors that would affect the outcome of following the information found in the blog. The blog is not a substitute for advice from a trained professional. You should always seek the advice of the automobile manufacturer, the dealer where the automobile may have been purchased, a qualified mechanic or other qualified professional with any questions you may have regarding automobile safety, maintenance, or repair. You should not delay, avoid or disregard the advice of the manufacturer, dealer or qualified auto mechanic because of anything you may have read, seen or heard in these blogs.